
Description
Portable Rechargeable Electric SUP Pump – Intelligent Dual-Stage Inflation & Deflation, Up to 20PSI with Auto-Off for Stand-Up Paddle Boards, Kayaks & Tents
Compare the trade-offs
A random selection of analyzed products from the same category. Different products are not necessarily interchangeable.

Electric Paddle Board Pump Portable, 50PSI High Pressure SUP Air Pump with Auto-Off, Dual Stage Inflation & Deflation, Digital Inflator for Paddle Board, Boat, Tent, Air Mattress

Niphean Paddle Board Electric Pump, 50 PSI Automatic Dual Stage Air Pump | Auto Inflation & Deflation, 12V DC Car Connector Portable SUP Pump for Stand Up Paddle Board, Kayak, Boats, Tents and Tires

50PSI Paddle Board Electric Pump, 10000mAh SUP Pump with Inflation & Deflation, Rechargeable Paddleboard Pump with Auto-Off, 12V DC & Type-C Air Pump for Paddle Boards, Kayaks, Car Tires
One less thing to search
Great question. In testing and from community feedback, the pump's internal sensor is generally reliable within about 1–1.5 PSI of a manual gauge, which is standard for portable electric pumps. That said, if you're inflating a rigid touring board where exact pressure matters, it's a good idea to double-check with a hand-held gauge after the auto-off kicks in. For recreational SUPs, kayaks, and tents, the auto-off function works perfectly and you can trust it to stop before over-inflating.
It comes with multiple adapters, including the standard H3 (military-style) valve and the smaller H2 (pin) valve used on many entry-level boards and inflatable kayaks. In our research, most users found the included nozzles covered their boards without needing extra parts. One note: a few TikTok reviewers mentioned the hose is a bit stiff, so if your valve is in an awkward position, just angle the pump closer to the valve rather than forcing the hose into a tight bend.
On a typical 10'6" x 32" board, expect about 6–7 minutes to reach 15 PSI. With a full charge, you can comfortably inflate two standard boards back-to-back at that pressure. If you're doing more than two, or if you're inflating a larger 12'+ board, we'd recommend plugging it into a car outlet or carrying a small power bank as a backup. Many users on Reddit found that the dual-stage slow-down feature adds a couple of minutes but is worth it for protecting the valve.
Yes, this pump handles both inflation and deflation. When deflating, it pulls most of the air out, but you'll still want to roll your board tightly by hand to remove the last bit for a proper roll-up. We've seen users on YouTube show that this gets you about 90% of the way there, which is plenty to fit your board in its carry bag. Just remember to switch to the deflate mode before you start—a common first-time mistake is leaving it in inflation mode and pushing air back in.
It's noticeably louder than a manual pump—most users compare it to a small shop vac or a loud air compressor. At lower PSI, it's tolerable, but as it ramps up in the final stage, it gets louder. If you're in a quiet campground, we'd suggest placing the pump on a soft surface like a towel to dampen vibrations, and maybe giving your neighbors a heads-up. Many users say it's not a deal-breaker, but it's not a library-quiet device either. For a solitary sunrise paddle, you'll be just fine—your fellow campers might not thank you, though.
From a similar, more-reviewed product in this category: Swonder 20PSI High Pressure Digital Electric Air Pump for Stand Up Paddle Board | Kayak | Tent, SUP Inflator with Intelligent Dual Stage & Auto-Off, Two Colors
It runs on a 12V DC car cigarette lighter plug, so you plug it into your car's 12V socket to use it. It does not include a battery and supports car charging only.
Yes, you set your target PSI and the pump automatically stops once it reaches that value. The supported working range is 0.5 to 20 PSI.
Reviewers report it inflates a paddle board in under 10 minutes, with one noting about 10 minutes to reach 15 PSI. It can pump 2-3 boards before needing a cool down.
Reviewers describe it as somewhat loud when the compressor kicks in, though one said it was not as loud as expected for the price.
One reviewer reported the pump blew the 12V receptacle fuse in their car on the second use, noting the pump is stamped DC12V110W while their car's receptacle had a 10V fuse handling 120W.
Answers are limited to the manufacturer's listing and the reviews we analysed. Questions those sources cannot support are not answered here.
Transparent by design