Question 1

Will these MEUS RACING beadlock wheels fit my stock Traxxas TRX4 or Axial SCX10 without modifications?**

Accepted Answer

Yes, these wheels are designed for 1/10 scale crawlers with a standard 12mm hex and 5mm axle pin. For TRX4 and SCX10 II models, they bolt directly on. However, the deep-dish offset adds about 8mm of width per side compared to stock wheels. On some scale bodies (like the Defender or Bronco), this may cause tire rub on fenders at full articulation. If you run a hard plastic body, consider a small spacer or trimming. For the Vanquish VS4-10, double-check your hex size—some versions use 15mm hexes and require a conversion set.

Question 2

How difficult is it to mount tires on these deep-dish beadlocks? I don't want to mess them up.**

Accepted Answer

It takes a bit of technique, but nothing extreme. Many TikTok builders recommend a simple trick: air the tires up to 2 psi first to make the bead pliable, then seat the inner ring by hand. A few hobbyists noted that the included screws can strip if over-torqued—tighten them in a star pattern with a hand driver, not a power tool. Once you've done it once, assembly takes about 5 minutes per wheel. If you've glued tires before, you'll find this much faster and easier to swap later.

Question 3

I've seen comments about the screws stripping. Is that a common issue?**

Accepted Answer

It happens occasionally, especially if you use a high-torque wrench. The screws are metric M2.5 hardware made of stainless steel—they're functional but not high-grade. We suggest swapping the included hex keys for a decent set of ball-end drivers to avoid rounding. If a screw strips, it's easy to replace with any M2.5 x 8mm cap screw from a hardware store. Most users find that by hand-tightening they avoid the problem entirely.

Question 4

Do I need special tires for these beadlocks, or will my current 1.9 tires work?**

Accepted Answer

Standard 1.9 inch tires (like Pro-Line or RC4WD) work perfectly. The deep-dish design actually grips the bead better than flat rims, so you can run softer compounds without fear of pop-offs. Just ensure your tire's inner diameter is truly 1.9 inches—some cheap tires have slightly off-size beads that won't seal. If you're new to beadlocks, avoid "vented" tires initially, as they can let dirt into the bead seal. Silicone tire foam inserts are a good investment to prevent squirming.

Question 5

Is the extra weight from the metal beadlock rings worth it for crawling performance?**

Accepted Answer

It depends on your build style. For rock crawling on technical lines, the added unsprung weight can help with traction on loose surfaces—think of it as free "power of weight" at the wheels. Many SCX10 and VS4-10 owners love them for this reason. However, for high-speed trail running or scale competition judging, the extra heft might cause the truck to feel sluggish or top-heavy. If you're building a dedicated competition rock crawler, the weight is a plus. For a scale trail truck, consider pairing them with lighter aluminum beadlocks on the front and these on the rear to balance handling.

MEUS RACING 1.9 Beadlock Wheels Rims Deep-Dish Wheel for Axial SCX10 Traxxas TRX4 Vanquish VS4-10 Redcat Gen8 1/10 RC Crawler Upgrades (Style B, Black)

Analysedetails

War diese Analyse hilfreich?

Wofür möchtest du dieses Produkt kaufen?

Hast du Fragen zu diesem Produkt? Frag die Community.