Question 1

Will this 1.5mm pad compress too much under a heavy cooler or water block?**

Accepted Answer

It's designed to be soft and forgiving—great for filling uneven gaps like VRAM or VRM heatsinks. However, if you're using direct-die cooling or a very tight mount, the pad may compress to about 1.2mm. For high-pressure applications, consider our 2.5mm version or a stiffer pad like Fujipoly. As one Reddit builder noted, "It's a premium gap filler, not a precision spacer."

Question 2

Does this thermal pad leave sticky residue when removed after months of use?**

Accepted Answer

The pad itself is non-conductive and adhesive-free, but under sustained heat and pressure, it can bond slightly with surfaces. Many TikTok users recommend removing it with isopropyl alcohol and a plastic spudger after long-term use. If you're swapping components frequently, a reusable thermal pad might be less messy.

Question 3

How do I cut this 100x100mm sheet cleanly without frayed edges?**

Accepted Answer

Use a sharp, single-blade razor and a ruler—scissors tend to push the soft material and create jagged lines. For best results, freeze the pad for 10 minutes first; it stiffens and cuts like a charm without curling edges. Just avoid cutting too close to the edge of the sheet to prevent tearing.

Question 4

Is this pad safe for CPU or GPU core direct contact, or only for VRMs?**

Accepted Answer

It's safe for direct contact with any component—it's non-conductive and won't short circuits. However, for CPU dies, most users prefer thermal paste for better heat transfer. The pad shines as a gap filler for memory modules, voltage regulators, and M.2 drives where paste is messy or impractical.

Question 5

I've seen mixed reviews about durability—will it harden or degrade in a hot PC over time?**

Accepted Answer

ARCTIC rates this pad for continuous operation up to 200°C, and real-world tests show no significant degradation after 6 months in a typical gaming PC at 70-85°C. The softer material may slightly compress over years, but it won't crack or turn brittle like some silicone pads. If you're building a high-heat workstation (>90°C daily), a stiffer alternative like Thermal Grizzly Minus Pad 8 offers more long-term consistency.

ARCTIC TP-3: Premium Performance Thermal Pad, 100 x 100 x 1,5 mm (1 Pièce) - Hautes performances, particulièrement souple, Gap-Filler idéal, remplissage des irrégularités, utilisation sûre

Analysis Details

Was this analysis helpful?

What are you buying this for?

Have questions about this product? Ask the community.