Question 1

Will this JAYO PETG work on my stock Ender 3 or other standard FDM printer without modifications?**

Accepted Answer

Yes, it’s compatible with most FDM printers that accept 1.75mm filament. However, many TikTok users and Reddit hobbyists note that you’ll likely need to increase your retraction settings (e.g., 5-6mm at 45mm/s) and bump up the bed temperature to 70-75°C to reduce stringing. For Ender 3 users, a plain glass bed with a light glue stick layer is often recommended for first-layer adhesion.

Question 2

I’m worried about tangles ruining my prints—is this a common problem with the 4-spool pack?**

Accepted Answer

Most users receive well-wound spools, but a small number report finding a cross-layer tangle mid-print. If you encounter this, JAYO’s after-sales team typically offers a replacement spool within the return window—just send photos of the tangled filament. As a precaution, many experienced users recommend checking the first few meters of each spool before starting a long job.

Question 3

The description says “strong toughness”—can I use this for mechanical parts like gears or brackets that need to handle some stress?**

Accepted Answer

It works well for low-stress functional prints like cable clips, phone stands, and light-duty brackets. For high-stress parts (e.g., tool holders or load-bearing joints), some users found it slightly more brittle than premium brands like Polymaker or eSun PETG+ in thin-wall sections. For everyday hobby projects, it’s a solid value—just avoid very thin walls if impact resistance is critical.

Question 4

How does the color compare to the product photos, especially the red and blue spools?**

Accepted Answer

Actual colors are slightly less saturated than the listing images. Multiple buyers described the red as more of a muted crimson and the blue as a deeper navy rather than a bright royal blue. The orange has also been reported as more of a washed-out peach tone. If color accuracy is vital for your project, consider ordering a single spool first to check.

Question 5

Is this a good buy for a beginner who has never printed with PETG before?**

Accepted Answer

It’s a budget-friendly way to try PETG, but beginners should know it comes with a learning curve. Compared to PLA, you’ll need to slow down your print speed (40-60mm/s), disable part cooling for the first few layers, and experiment with retraction to avoid stringing. If you’re willing to tune your settings, you’ll get great results—just don’t expect it to be as forgiving as PLA.

JAYO PETG Filament 1.75mm 4.4KG, Strong Toughness PETG 3D Printer Filament, 1.1 KG Per Spool, 4 Spools, Dimensional Accuracy +/- 0.02 mm, Fits for Most FDM 3D Printers (Red, Blue, Orange, Green).

Detalles del análisis

¿Fue útil este análisis?

¿Para qué estás comprando este producto?

¿Tienes preguntas sobre este producto? Pregunta a la comunidad.