Question 1

Will this 1.5mm pad compress too much under a heavy cooler or water block?**

Accepted Answer

It's designed to be soft and forgiving—great for filling uneven gaps like VRAM or VRM heatsinks. However, if you're using direct-die cooling or a very tight mount, the pad may compress to about 1.2mm. For high-pressure applications, consider our 2.5mm version or a stiffer pad like Fujipoly. As one Reddit builder noted, "It's a premium gap filler, not a precision spacer."

Question 2

Does this thermal pad leave sticky residue when removed after months of use?**

Accepted Answer

The pad itself is non-conductive and adhesive-free, but under sustained heat and pressure, it can bond slightly with surfaces. Many TikTok users recommend removing it with isopropyl alcohol and a plastic spudger after long-term use. If you're swapping components frequently, a reusable thermal pad might be less messy.

Question 3

How do I cut this 100x100mm sheet cleanly without frayed edges?**

Accepted Answer

Use a sharp, single-blade razor and a ruler—scissors tend to push the soft material and create jagged lines. For best results, freeze the pad for 10 minutes first; it stiffens and cuts like a charm without curling edges. Just avoid cutting too close to the edge of the sheet to prevent tearing.

Question 4

Is this pad safe for CPU or GPU core direct contact, or only for VRMs?**

Accepted Answer

It's safe for direct contact with any component—it's non-conductive and won't short circuits. However, for CPU dies, most users prefer thermal paste for better heat transfer. The pad shines as a gap filler for memory modules, voltage regulators, and M.2 drives where paste is messy or impractical.

Question 5

I've seen mixed reviews about durability—will it harden or degrade in a hot PC over time?**

Accepted Answer

ARCTIC rates this pad for continuous operation up to 200°C, and real-world tests show no significant degradation after 6 months in a typical gaming PC at 70-85°C. The softer material may slightly compress over years, but it won't crack or turn brittle like some silicone pads. If you're building a high-heat workstation (>90°C daily), a stiffer alternative like Thermal Grizzly Minus Pad 8 offers more long-term consistency.

ARCTIC TP-3: Premium Performance Thermal Pad, 100 x 100 x 1,5 mm (1 Pièce) - Hautes performances, particulièrement souple, Gap-Filler idéal, remplissage des irrégularités, utilisation sûre

विश्लेषण विवरण

क्या यह विश्लेषण उपयोगी था?

आप इस प्रोडक्ट को किस लिए खरीद रहे हैं?

इस प्रोडक्ट के बारे में सवाल हैं? समुदाय से पूछें।