Question 1

Does this 4.4kg bundle offer good value for money, or should I buy single spools from another brand?**

Accepted Answer

If you print a lot of functional parts—like brackets, jigs, or enclosures—this bundle saves you about 30% compared to buying four separate spools. Many TikTok users have pointed out that the black and white spools perform reliably for everyday use. However, if you require perfectly consistent transparency or exact color matching (especially for the grey), you may find better results spending more on single-spool specialty brands.

Question 2

I'm new to PETG. Will this filament work on my Ender 3 without upgrades?**

Accepted Answer

Yes, it fits most open-frame FDM printers like the Ender 3. That said, PETG strings more than PLA, so expect to spend your first hour tuning retraction settings (typically 2–4mm at 40mm/s). A number of Reddit users noted that while the advertised +/- 0.02mm accuracy held true, the filament absorbs moisture quickly—if your prints look hazy or bubbly, dry it for 4 hours at 65°C before use.

Question 3

How tough is “strong toughness PETG”—can I use this for functional parts like drone arms or tool handles?**

Accepted Answer

Yes for thick-walled designs (3mm+), but caution for thin walls. The filament has good layer adhesion for load-bearing parts, but buyers have reported that thin-walled vases or shells can crack under light pressure. For high-impact items, design with at least 3 perimeters. One YouTube creator’s torture test showed it withstood 15kg of static load but snapped at 8kg on points under 2mm thick.

Question 4

I’ve seen complaints about spool tangles. How are these spools wound?**

Accepted Answer

The spool winding quality varies by batch—some users report perfectly smooth feeding, while others have found tangles buried mid-spool that derail long prints. A common tip from the community is to inspect the first few layers when starting a new spool: if you see loose strands, rewind the first 5 meters by hand to prevent jams. For critical 20+ hour prints, consider transferring the filament to a sealed dry box with a better spool holder.

Question 5

Can I get a refund if the transparent filament prints yellow instead of clear?**

Accepted Answer

The return policy covers defective filament (e.g., excessive diameter variance or contamination), but color tint variation is generally not considered a defect in PETG. Many users on TikTok have pointed out that transparent PETG naturally yellows with heat exposure during printing—for truly clear results, you may want to try a dedicated crystal-clear brand like eSun. If color accuracy is critical for your project, contact customer support before ordering to confirm current batch tint.

JAYO PETG Filament 1.75mm Bundle 4.4KG, Strong Toughness PETG 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, Fits for Most FDM 3D Printers, Black+White+Grey+Transparent.

分析の詳細

この分析は役に立ちましたか？

この商品を何のために購入しますか？

この商品について質問がありますか？コミュニティに聞いてみましょう。